Driving on roads with designated lanes requires careful attention to signage and road markings. These lanes are reserved for specific types of vehicles during designated hours and must be respected accordingly. Never drive or park in a cycle lane during its hours of operation, and exercise caution when driving over footpaths, doing so only when necessary for property access.
On dual carriageways, the right-hand lane is primarily for turning right or overtaking. This rule also applies to three-lane dual carriageways. When approaching junctions, position yourself appropriately in advance. Keep left if turning left, and always check for cyclists before making your turn, especially in slow-moving traffic.
When turning right at a crossroads alongside an oncoming vehicle also turning right, it’s generally safest to keep the other vehicle to your right and turn behind it. However, if you must pass in front of the other vehicle, proceed with extra caution, as visibility may be compromised.
When turning right onto a dual carriageway with a narrow central reservation, ensure the road is clear in both directions before emerging. Keep a box junction, marked by yellow hatched lines, clear at all times. Only enter if your exit road is clear, and you may wait in the box if prevented from turning right by oncoming traffic.
At crossroads without signs or markings, no vehicle has priority. Exercise caution and check carefully in all directions before proceeding.
When approaching and navigating roundabouts, adhere to signs and road markings. If you intend to go straight ahead:
- Do not signal as you approach the roundabout.
- Signal left before you exit the roundabout, immediately after passing the exit before the one you intend to take.
Certain vehicles may not adhere to typical rules on the road:
- Cyclists and horse riders have the option to remain in the left-hand lane even if they intend to turn right.
- Long vehicles may adopt a different positioning to prevent the rear of the vehicle from colliding with the curb.